NVil Forum
General Category => Bug Reports => Topic started by: samardac on May 11, 2016, 07:56:44 pm
-
Some Bugs:
- Has Selection$, when in subobject mode always return true, but it must return true only if something is selected.
- When you have Multi Selection Disabled on Selection mode Change - ON, Multi Selection$ stay true when you change selection mode, but have to be false because when you changed Selection Mode it is disabled.
- When you put into Composite tool tools that have UI(BG Image, Open Box Tool, etc.. ) NVil do not wait until this tool will be closed to perform next tool after it.
For example if you run this tool it will Run Open Box Tool and at the same time show message, fix it pleas it must show message only after you close - Open Box Tool.
(https://monosnap.com/file/dHApps130JsVlfLvlmkMR9mPvOHWgw.png)
- Now Hard Edge color overide Freezed edges color, fix it pleas, Freezed color must be on top of Hard edge color.
- Now Pivot is not visible when you activate Manual Pivot and Object/Mesh Pivot SL tools.
- Action Cancel Command do not Cancel Create Spline tool from Composite tool when you run it with Hotkey.
Some requests:
- Now if you double click in Subobject Mode it selects all subobjects, can you pleas replace it with Select Similar Facing (Connection Only). To select all subobjects we can use Select All. Or if you think that not all usesr will use it make pleas option for this.
- Make pleas Subset tool sticky.
- I asked previously to make NVil to activate windows only when you click them works good but now you can scroll buttons only if you click its window, so can you pleas revert how it was before - window activates when you go with cursor other it.
-
- I asked previously to make NVil to activate windows only when you click them works good but now you can scroll buttons only if you click its window, so can you pleas revert how it was before - window activates when you go with cursor other it.
When did you make this request? Which version has the previous behavior?
-
It was introduced in last update May 10 2016.
In Apr 26 2016 it works as I requested in this topic.
-
Where is the post for that request?
-
Hay IStonia, I just checked NVil behavior and looks like it works good. I do not know what it was but it doesn't worked and I thought it because I asked you about it, may be I am just very tired and confused a bit sorry, everything is working nice.
-
- Now Pivot is not visible when you activate Manual Pivot and Object/Mesh Pivot SL tools.
What is this pivot? How do you show them?
-
This one:
(https://monosnap.com/file/O5LqsE1ahBtYnkHvrtQE79MZX05ReG.png)
-
How can I make it visible?
-
When you activate Manual Pivot and Object/Mesh Pivot SL tools and have Manipulator turned Off you see nothing only little cross for snapping. So it would be great to see this Pivot.
-
On my side, when those sl tools are on, manipulator are always visible. So that's different from yours.
Can you make a video?
-
Check it:
http://take.ms/eyJKg
-
http://www.digitalfossils.com/Download/NVil-May-13-16.rar
- Has Selection$, when in subobject mode always return true, but it must return true only if something is selected.
Fixed.
- When you put into Composite tool tools that have UI(BG Image, Open Box Tool, etc.. ) NVil do not wait until this tool will be closed to perform next tool after it.
For example if you run this tool it will Run Open Box Tool and at the same time show message, fix it pleas it must show message only after you close - Open Box Tool.
(https://monosnap.com/file/dHApps130JsVlfLvlmkMR9mPvOHWgw.png)
Not possible.
- Now Hard Edge color overide Freezed edges color, fix it pleas, Freezed color must be on top of Hard edge color.
Fixed.
- Now Pivot is not visible when you activate Manual Pivot and Object/Mesh Pivot SL tools.
Maybe fixe.
-
Everything works!
- Now Pivot is not visible when you activate Manual Pivot and Object/Mesh Pivot SL tools.
Works only with Object/Mesh Pivot but with Manual Pivot do not work.
-
Also just notice, IStonia I asked to make Pivot visible because Manipulator is to big and very often you can not set pivot if the place you need is under Manipulator, so you need to move away manipulator than set pivot where you need. I meat this very often. So my plane is replace Manipulator with Pivot and enable Manipulator with shortcut only if you need it.
Now I notice that Manipulator is Invisible but looks like it is still here because you can not set pivot looks like because Manipulator is here.
Check this video:
http://take.ms/Uu9Qm
-
http://www.digitalfossils.com/Download/NVil-May-13-16.rar
- Make pleas Subset tool sticky.
Can you explain what is the current behavior and What is the sticky behavior you want?
-
Current behaviour is, you tap hotkey - subsets enable/disable.
New beahviour will be like this:
If you tap hotkey - subsets enable/disable.
If you press hotkey and keep it pressed subsets will be enabled temporary only whyle you keep hotkey pressed.
It have to use standart timinig we use for sticky keys.
-
See if sticky now.
http://www.digitalfossils.com/Download/NVil-May-14-16.rar
-
Everything works great! Also I see you fixed bug with Pivot, many thanks!
-
http://www.digitalfossils.com/Download/NVil-May-14-16.rar
- Action Cancel Command do not Cancel Create Spline tool from Composite tool when you run it with Hotkey.
Fixed.
-
Nice!
-
- Now if you double click in Subobject Mode it selects all subobjects, can you pleas replace it with Select Similar Facing (Connection Only). To select all subobjects we can use Select All. Or if you think that not all usesr will use it make pleas option for this.
Is it just for polygon selection?
-
No, for all subobjects modes.
-
I don't think it is suitable for edge selection as LMB and MMB double click in edge mode select different things.
In vertex/polygon mode, currently LMB/MMB double click will do the same thing, either whole mesh select or island select. So it could be a good chance to use either LMB or MMB double click for similar facing select.
-
Good, I understood, no problem lets use LMB double click for polygons and vertexes face selection!
-
http://www.digitalfossils.com/Download/NVil-May-14-16.rar
* Edit > Preference > Options > Switch similar facing double click select from MMB To LMB.
-
It is really, really great feature very, useful!!!
IStonia, now in vertex mode it does not select full face, can it be fixed?
(https://monosnap.com/file/HTdmPJYrSqLRJ5jddzlYfiBn4WxCRd.png)
-
I couldn't find any reliable way.
-
Good, than I think we can disable it for vertexes and leave it only for polygons. With polygons it is just awaysome!
-
http://www.digitalfossils.com/Download/NVil-May-14-16.rar
-
Thanks!
-
- When you have Multi Selection Disabled on Selection mode Change - ON, Multi Selection$ stay true when you change selection mode, but have to be false because when you changed Selection Mode it is disabled.
If I change it to the behavior you want, after changing selection mode, the button will become unchecked which may make the user think the multi selection has been turned off and he may try to click the button to turn it back on.
So either way will cause confusion.
-
Good lets leave it as it is now.
Can you pleas make this, when Switch similar facing double click select from MMB To LMB is ON,
Alt+Double click will select mesh in all subobject mods. I hope it will not conflict with over tools.
Check your mail.
-
If Alt is assigned for viewport navigation or Alt is Assigned to any selection operator hotkey, your request won't work or result can be unexpected.
-
Good! I just found that in polygons mode if you double click Middle mouse button it will select mesh it is awaysome so everything is cool!
-
- When you put into Composite tool tools that have UI(BG Image, Open Box Tool, etc.. ) NVil do not wait until this tool will be closed to perform next tool after it.
For example if you run this tool it will Run Open Box Tool and at the same time show message, fix it pleas it must show message only after you close - Open Box Tool.
Not possible.
I need it to modify BG Image tool. So can you pleas modify it, it have to work this way:
---Whe you activate it:
Disable selection mode
Enables Universal Manipulator
---Weh you close it:
Restore selection mode
Restore manipulator
-
Try this
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
-
Awaysome!!