NVil Forum
General Category => Feature Requests => Topic started by: samardac on May 21, 2016, 07:58:53 pm
-
1. Can you pleas add new option that will work exactly like Multi Selection Disabled on object mode changed - but it will turn off multi selection complitley. So to enable multi selection next time you will have to perform - Enable multi selection$
2. Add pleas Subobject Extrude Basic SL tools. I need them to use when multiselection is ON. Now you alwas have to switch to some selection mode to enable Extrude for this selection mode.
- Subobject Extrude_Axis, will work in edge and polygon mods
- Subobject Extrude_Face/Normals_Direction, will work in edge and polygon mods
- Subobject Extrude_Plane, will work in edge, polygon and vertex mode. In vertex mode it will perform extrude vertex.
3. We have to a bit optimeze Preview Enabled Switch, now if you have selected polygons they will be visible when preview is enabled, and it looks not good, lets fix it.
When you activate Preview Enabled Switch, can you pleas add before preview will be enabled this:
- Copy subobject selection
- Clear Selection
And before tool weel be deactivated add pleas this:
- Resore subobject selection
So it will disable selection when preview is active.
4. Now if you want to preview subdivided object you have to:
- Subdivide this object
- Activate preview temporary
- Unsudivide object
You have to run 3 hotkeys. Lets optimize it so you will have to fire only one hotkey, and you will see subdivided object in preview temporary, this is how it will work -
Toggle Subdivision and Preview:
If key just tapped,
Toggle subdivision$
If key pressed and you keep it pressed:
(
If preview or silhouette is enabled, do nothing.
Else
(
If one of selected objects is subdivided,
Enable just preview temporary.
Else
Subdivide object temporary and enable preview temporary.
)
)
I will combine this hotkey with zoom, pan, rotate so you will have fully functional temporary preview with navigating of subdivided object.
-
IStonia, can you pleas consider these requests as top priority, I just need to finish all stuff with workflow and move forward.
-
Check 3 and 4.
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
-
Warks really greate!! So usefull features!
When you enable Toggle Subdivision$ temporary, Preview Enabled Switch$ stay false, make it pleas true.
-
Try this
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
Also selection is disabled in preview.
-
Works Greate!!
I just notice that pivot is visible in preview:
(https://monosnap.com/file/as7arQQmZ39VGSg1MwSWnDGni78Yxe.png)
Can you pleas add:
View -> Object Shading -> Preview On Viewport Navigating -> Hide Pivot on Preview.
-
I just hide it in preview. No option given.
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
-
Many thanks!!
-
1. Can you pleas add new option that will work exactly like Multi Selection Disabled on object mode changed - but it will turn off multi selection complitley. So to enable multi selection next time you will have to perform - Enable multi selection$
Do you mean turning off multi-selection when selection mode is changed.
-
Do you mean turning off multi-selection when selection mode is changed.
Yes! Complitley turn off!
-
Why do you want this option?
How often do you change it?
Do you still need this option, Edit > Preference > Options > Multi-Selection disabled on object mode changed?
-
Why do you want this option?
After about half year of xperements I finally created workflow that I like.
It works like this,
We have assigned to RMB, tool that I called - Reset.
Reset does this:
- Clear Selection
- Activate Deafault SL tool
- Turn off Preview
- Switch to Vertex Mode
- Enable Multi Selection
After you right click, you reset everything and you are redy to start next modeling "Cycle".
So here I need this new Turn off Multiselection option because when you Reset, Multiselection is Turned On but as soon as you select any sub object or switch to any Selection Mode Multi Selection must be turned off. And next time you RMB multi selection will be Turned On again.
How often do you change it?
Looks like very often.
Do you still need this option, Edit > Preference > Options > Multi-Selection disabled on object mode changed?
When you will implement this new option I will not use it any more, but may be somebody will use it.
-
How often do you change it?
Looks like very often.
In what cases you want this option on and what cases you want it off?
-
This option always must be On.
If this option is On and Multi selection is On
(
If you switch to any subobject selection mode by:
(
- selecting this subobject
or
- by click button
or
- by hotkey
)
Then
(
it will turn off multi selection
)
)
You mean this? Let me know if you need more information.
-
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
Edit > Preference > Options > Multi-Selection turned off on object mode changed.
-
Very cool!
These tools enable Multi Selection when you activate them:
- Edges on Polygon Selection Border
- Polygons Inside Edge Selection
Can you pleas disable it, so when you run these tools they will not enable multi selection.
-
In my testing, they didn't turn on multi selection.
-
Hay, check this video I show here this problem:
http://take.ms/HQHcY
I just sent you my config on mail.
-
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
-
Many thanks!!!
-
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
* New basic streamline tool, Subobject Tools > Extrude > Subobject_Extrude_Normal. Base on selection or highlighted subobject, activate 'Vertex_Extrude'/'Edge_Extrude_Face/Normal_Direction'/'Polygon_Extrude_PolygonNormal' respectively.
* New basic streamline Tool, Subobject Tools > Exturde > Subobject_Extrude_Plane. Base on selection or highlighted subobject, activate 'Vertex_Extrude'/'Edge_Extrude_Plane'/'Polygon_Extrude_Plane' respectively.
* New basic streamline Tool, Subobject Tools > Exturde > Subobject_Extrude_Axis. Base on selection or highlighted subobject, activate 'Vertex_Extrude'/'Edge_Extrude_Axis'/'Polygon_Extrude_Axis' respectively.
-
It is really greate!!!
-
IStonia,
Can you pleas add this functionality when you switch Selection Mods:
If you switch from Sub-Object Mode(Vertex, Edge, Poly) to Sub-Object Mode
If Active SL tool is Subs-Object tool or Generic tool
Then
It will be not dropped
Else
SL tool will be dropped
If you switch from Sub-Object Mode to Object Mode or Vice Versa
If Active SL tool is Generic tool
Then
It will be not dropped
Else
SL tool will be dropped
We need these functionality because now you can be confused if you switch for example from Vertex mode to Polygon Mode and have vertex tool active, it will stay active but you could not use it. This new code will keep active or cancel SL tools depend on their Types.
Little Bug:
If you have Autoweld enabled and weld something it will switch to some subobject mode - sometimes it is edge, sometime polygons, I can not understood how it works, anyway it have to do not touch Selction Mods, it have to just Weld without any other selection mode changes.
Check this video:
http://take.ms/1ZXRT
-
I couldn't recreate the selection mode change bug. Can you send me your config?
-
Sent!
-
http://www.digitalfossils.com/Download/NVil-May-18-16.rar
-
Thanks!
-
Hi,
It could be usefull to be able to switch between preview and program pipe simulation inside the designer.
Robert